19-inch 1U server-system short 'Emu A6.1' - quad-core Celeron, dual LAN

  • Available now!
  • Item no.: 1380
  • Shipping time: 2 - 3 workdays
Operating noise:


Our "Emu A6.1" is a 1U rack-mount IPC system based on a quad-core intel Celeron processor (intel Celeron N3150 with 4 x 1,6 GHz) and was designed for industrial use mostly. The system combines high energy-efficiency with powerful performance in a very compact 1U chassis with only 25cm depth - qualifying it for a range of possible applications.


Within a depth of only 250mm this system combines a Gigabyte GA-N3150N-D3V mainboard with passively cooled intel Celeron N3150 quad-core processor and - in the base-configuration - 4GB Kingston DDR3L-1600 RAM (max. 8GB DDR3L). The mainboard is equipped with dual gigabit LAN ports, an onboard graphics card with D-Sub VGA and DVI-D connector, two external serial ports, four internal SATA connectors (4 x SATA-600) and an onboard soundcard. With an optional riser-card, the integrated 32bit PCI Slot can be used for the expansion of the system with an optional 32bit PCI expansion-card.

Manufactured with high quality and combined with an "80PLUS Bronze" certified 200W Enhance FlexATX power-supply, this 1U rack-mounted system is a very robust platform for a wide field of applications - even under demanding conditions. Installation in a 19-inch server-rack or network-cabinet can alternatively be carried out with the chassis turned by 180 degrees for direct access to the connectors at the rear of the system. For this case, it is possible to integrate a second set of control-buttons and LEDs into the back-side of the chassis. The primary set of controls is integrated into the front-panel - as well as two USB 2.0 ports.

Energy-efficient design

Having a TDP of only 6W, the intel Celeron N3150 quad-core processor belongs to the most economical and power-efficient processors on the market to this date. It is designed as a "system-on-chip" and does not need an external chipset as most features which used to be handled by the chipset are already integrated directly into the processor. We also offer this system alternatively as a "silent"-version with three extremely silent and decoupled 40mm system-fans.

Compatibility and expandability

In contrast to systems with an intel D2500 Atom processor the "Emu A6.1" supports the installation of 64bit Windows operating-systems (Windows 7, Windows 8/8.1, Windows 10) without any problem.

We equip the base-configuration of this system with 4GB DDR3L-1600 Kingston low-voltage main-memory - a maximum of 8GB is possible. With an optional 32bit PCI expansion card the integrated 32bit PCI Slot can be used for the expansion of the system. Furthermore it is possible to integrate up to two 2,5" HDD/SSD's or one 3,5" harddisk (please note that the PCI Slot can not be used when installing a 3,5" harddisk). Just choose your desired options within the configuration-tool below.

Scope of supply

After system-assembly, the completed system receives an extensive and thorough system-test before being shipped. Included in the scope of supply are - apart from the server-system - the complete mainboard-accessories, a screw-kit, a power-cord (please contact us if you need a special cord) and two matching short-length SATA-cables for hassle-free cabling of your devices. The system will be shipped without operating-system.


19" 1U server system - yakkaroo "Emu A6.1" (base-configuration)
CPU: intel Celeron N3150
- quad Core / 4 x 1,6 GHz
- "Braswell " micro-architecture (14nm)
- 2M L2 cache
- 6W TDP
- passive cooling
- VT-x, VT-x EPT, AES-NI
Mainboard: Gigabyte GA-N3150N-D3V with dual gigabit LAN
- System-on-Chip without separate chipset
- slots: 1 x 32bit PCI standard slot (only usable with optionally available riser-card and when using 2,5" harddisks instead of a 3,5" harddisk), 1 x M.2 socket 1 for WIFI module
- RAM: two slots for DDR3L-1600 (DDR3 low voltage) up to a maximum of 8GB
- form-factor: mini ITX
- SATA controller: 4-channel SATA3 / 6.0Gbit/sec. (2 x via SoC / 2 x via ASMedia ASM1061)
- graphics: onboard intel HD Graphics / DVI-D and D-Sub connector / supports Dual Display
- audio: onboard Realtek 2/4/5.1/7.1-channel
- LAN: onboard DUAL gigabit network-card (2 x Realtek 8111G)
- 2 x USB 3.0 connectors (rear-side)
- 4 x USB 2.0 connectors (2 x rear-side, 2 x at the front-panel)
- two serial COM ports (RS-232)
RAM: 4GB DDR3L-1600 S0DIMM - low voltage / one module with 4GB
Harddisk: none installed
- please note the restrictions concerning expansion cards when installing a 3,5" harddisk
Power-supply: 200W Enhance FlexATX power-supply
- with PFC, 80 PLUS Bronze certification and 4cm cooling fan
Chassis: 19" 1U rack-mounted server-chassis / black - IPC-C125B - only 25cm deep
- cooled by two standard 40mm fans behind the front-plate
- internal installation-capabilities for two 2,5" harddisks/ssd's or one 3,5" harddisk (when using a 3,5" harddisk there is no room left for installation of an expansion-card in the system)
- supports one 32bit PCI expansion-card via an optional riser-card with extender (please see "accessories" above)
- the system can be integrated into the server-rack with its rear-side at the front (180 degree turned / for "rear-access") - for direct access to the connectors on the backside of the chassis
- dimensions (WxDxH): 430mm x 250mm (+ 45mm / retractable handles) x 43,5mm
Box contents : 1U server-system, mainboard-accessories, chassis-accessories, two matching short SATA cables, one power-cable and a screw-kit


    Average product rating:

    (This product has got No Reviews)

    Share your experience with other customers

    Your configuration

    * Mandatory fields

    intel Celeron processor

    intel Celeron processor*

    Main memory

    Main memory*

    Solid State Drive / SSD

    Solid State Drive / SSD*

    + -
    Matching accessories

    Matching accessories

    Universal 32bit PCI riser card with extender for use in 1U chassis. Ideal for mounting a 32bit expansion-card in our 1U cases "IPC-C125B" and "1U-K-125L" and in our 1U server-systems with 32bit PCI slot.

    Type: Ably GH-610-EF plus Casetronic Extender
    slot: for operation of a standard 32-bit PCI plug-in card
    direction: left-side insertion ? with extender
    additional: - various holes as an additional mounting option
    - ideal for the use in our 1U chassis of the types IPC-C125B or 1U-K-125L and in our 1U server-systems with 32bit PCI slot

    Other customers have also bought the following items