19-inch 1U server-system short 'Emu A6' - quad-core Celeron, dual LAN

  • Not available now!
  • Item no.: 1373
  • Item not available
Operating noise:


This item is EOL (end of life). You are looking at a page from our product-archive.

The succeeding model "Emu A6.1" can be found at the following link:
19" Mini Server 1HE kurz 'Emu A6.1' - Quad-Core Celeron, mini ITX, Dual LAN

Our "Emu A6" is a 1U rack-mount IPC system based on a quad-core intel Celeron processor (intel Celeron J1900 with 4 x 2,0 GHz) and was designed for industrial use mostly. The system combines high energy-efficiency with powerful performance in a very compact 1U chassis with only 25cm depth - qualifying it for a range of possible applications.


Within a depth of only 250mm this system combines a Gigabyte GA-J1900N-D3V mainboard with passively cooled intel Celeron J1900 quad-core processor and - in the base-configuration - 4GB Kingston DDR3L-1333 RAM (max. 8GB DDR3L). The mainboard is equipped with Dual gigabit LAN ports, an onboard graphics card with D-Sub VGA and DVI-D connector, two external serial ports, two internal SATA connectors (2 x SATA-300) and an onboard soundcard. With an optional riser-card, the integrated 32bit PCI Slot can be used for the expansion of the system with an optional 32bit PCI expansion-card.

Manufactured with high quality and combined with an "80PLUS Bronze" certified 200W Enhance FlexATX power-supply, this 1U rack-mounted system is a very robust platform for a wide field of applications - even under demanding conditions. Installation in a 19-inch server-rack or network-cabinet can alternatively be carried out with the chassis turned by 180 degrees for direct access to the connectors at the rear of the system. For this case, it is possible to integrate a second set of control-buttons and LEDs into the back-side of the chassis. The primary set of controls is integrated into the front-panel - as well as two USB 2.0 ports.

Energy-efficient design

Having a TDP of only 10W, the intel Celeron J1900 quad-core processor belongs to the most economical and power-efficient processors on the market to this date. It is designed as a "system-on-chip" which does not need an external chipset as most features that used to be handled by the chipset are already integrated directly into the processor. We also offer this system alternatively as a "silent"-version with three extremely silent and decoupled 40mm system-fans.

Compatibility and expandability

In contrast to systems with an intel D2500 Atom processor the "Emu A6" supports the installation of 64bit Windows operating-systems (Windows 7, Windows 8/8.1) without any problem.

We equip the base-configuration of this system with 4GB DDR3L-1333 Kingston low-voltage main-memory - a maximum of 8GB is possible. With an optional 32bit PCI expansion card the integrated 32bit PCI Slot can be used for the expansion of the system. Furthermore it is possible to integrate up to two 2,5" HDD/SSD's or one 3,5" harddisk (please note that the PCI Slot can not be used when installing a 3,5" harddisk). Just choose your desired options within the configuration-tool below.

Scope of supply

After system-assembly, the completed system receives an extensive and thorough system-test before being shipped. Included in the scope of supply are - apart from the server-system - the complete mainboard-accessories, a screw-kit, a power-cord (please contact us if you need a special cord) and two matching short-length SATA-cables for hassle-free cabling of your devices. The system will be shipped without operating-system.


19" 1U server system - yakkaroo "Emu A6" (base-configuration)
CPU: intel Celeron J1900
- quad Core / 4 x 2,0 GHz
- "Silvermont / Bay-Trail" micro-architecture
- 2M L2 cache
- 10W TDP
- passive cooling
Mainboard: Gigabyte GA-J1900N-D3V with dual gigabit LAN
- System-on-Chip without separate chipset
- slots: 1 x 32bit PCI standard slot (only usable with optionally available riser-card and when using 2,5" harddisks instead of a 3,5" harddisk), 1 x mini PCIe x1
- RAM: two slots for DDR3L-1333 (DDR3 low voltage) up to a maximum of 8GB
- form-factor: mini ITX
- SATA controller: 2-channel SATA2 / 3.0Gbit/sec.
- graphics: onboard intel HD Graphics / DVI-D and D-Sub connector / supports Dual Display
- audio: onboard Realtek 2/4/5.1/7.1-channel
- LAN: onboard DUAL gigabit network-card (Realtek)
- 4 x USB 3.0 connectors (rear-side)
- 2 x USB 2.0 connectors (at the front-panel)
- two serial COM ports (RS-232)
RAM: 4GB DDR3L-1333 S0DIMM - low voltage / one module with 4GB
Harddisk: none installed
- please note the restrictions concerning expansion cards when installing a 3,5" harddisk
Power-supply: 200W Enhance FlexATX power-supply
- with PFC, 80 PLUS Bronze certification and 4cm cooling fan
Chassis: 19" 1U rack-mounted server-chassis / black - IPC-C125B - only 25cm deep
- cooled by two standard 40mm fans behind the front-plate
- internal installation-capabilities for two 2,5" harddisks/ssd's or one 3,5" harddisk (when using a 3,5" harddisk there is no room left for installation of an expansion-card in the system)
- supports one 32bit PCI expansion-card via an optional riser-card with extender (please see "accessories" above)
- the system can be integrated into the server-rack with its rear-side at the front (180 degree turned / for "rear-access") - for direct access to the connectors on the backside of the chassis
- dimensions (WxDxH): 430mm x 250mm (+ 45mm / retractable handles) x 43,5mm
Box contents : 1U server-system, mainboard-accessories, chassis-accessories, two matching short SATA cables, one power-cable and a screw-kit


When using a 3,5" harddisk in this system, there is not enough room left for the integration of an expansion-card with a riser-card. This integration is only possible, when using 2,5" harddisks or SSD´s.


    Average product rating:

    (This product has got No Reviews)

    Share your experience with other customers

    Other customers have also bought the following items